FN-FAL / L1A1 Gunsmithing
|
|
ASSEMBLY SERVICES
|
|
|
Imbel Kit Custom Build
|
|
CUSTOM FALS
|
SHIP YOUR RIFLE TO:
ENTREPRISE ARMS
ATTN: GUNSMITHING/SERVICE DEPT.
5321 IRWINDALE AVE
IRWINDALE, CA 91706 |
We will work on all FN Kit
(British, StG, Imbel, Israeli, G1, Ishapor, Argentine, Canadian,
etc...)
We will work on all dependable receivers (Entreprise, Imbel, DSA, Hesse,
Williams, Olympic etc...)
|
Assembling an L2A2 Parts kit:
Assembly Tools
Lower Assembly
Upper Assembly
|
|
SERVICES
|
DESCRIPTION |
PRICE |
|
Basic Assembly
Special
|
1) Check chamber throat erosion.
2) Assembly of all front end components.
3) Install barrel & true sight assembly.
4) Headspace to military specifications.
5) Test fire for function. |
$105.00*
$75.00*
|
|
Premiere Assembly
|
Same as above PLUS:
6) Critical Inspection of all front components.
7) Clean & lubricate all parts.
8) Inspect & align gas system for optimum cycling.
9) Inspect & adjust extractor.
10) Check barrel for alignment. |
$165.00* |
|
Master Assembly
|
Same as above PLUS:
11) Smooth & polish extractor surfaces.
12) True lower to upper.
13) Accurize rear sight.
14) Inspect & clean recoil spring assembly.
15) Remove vertical play from upper & lower receiver.
16) Check for barrel straightness.
17) Seal gas system.
18) Clean & inspect trigger and hammer assembly.
19) Clean & inspect bolt assembly.
20) Accurize bolt for full lock up. |
$225.00* |
|
*Assembly Parts Kit
Required on all assembly services
|
1) New breeching washer. (Inch
Receivers)
2) New locking shoulder.
3) Mounting pins
4) Cleaning supplies |
+$40.00 |
|
Building a Fal
|
|
Install U.S. Parts
|
Install U.S. made parts kit (Customer
provided)
|
$65.00 |
Install
Entréprise Arm's U.S. made parts kit
Does not include muzzle brake installation (see below)
§when performed in conjunction with Basic, Premiere
or Master assembly services |
FREE§ |
|
ADDITONAL FAL SERVICES
|
|
Tune Up Package
|
1) Throat Erosion - inspect barrel erosion.
2) Clean & lubricate all parts.
3) Headspacing - correct to military specifications.
4) Check barrel for alignment & proper torque.
5) Gas Piston - inspect for abnormal wear.
6) Bolt Assembly - clean & inspect extractor.
7) Inspect & clean firing pin and spring.
8) Gas System - inspect for leakage & clean gas block.
9) Clean recoil spring (lower receiver must be sporter).
10) Lap bolt carrier to receiver. |
$95.00 |
|
Action Job |
1) Inspect & adjust for 8 lb. let
off.
2) Inspect & adjust trigger spring.
3) Inspect & adjust trigger assembly.
4) Inspect & adjust plunger spring.
5) Inspect & adjust sear.
6) Deburr & polish all contact points.
7) Polish hammer & sear pin.
8) Polish trigger face. |
$125.00 |
|
Metric to Inch Conversion
|
Remill the following:
1) Cocking handle rail - to accept folding cocking lever.
2) Magazine well - to accept inch magazine.
3) Modify dustcover.
4) Mill cocking handle slot on receiver |
$100.00 |
|
Refinishing |
Parkerize entire weapon
Special - when performed in conjunction with Basic, Premiere or Master
assembly services
Reblue entire weapon
Special - when performed in conjunction with
Basic, Premiere or Master assembly services
INCLUDES:
Complete disassembly of entire weapon
Bead Blasting of all metal parts
Refinish all internal & external parts |
$200.00
150.00
$200.00
150.00 |
|
Disassemby
|
Remove barrel from existing receiver
|
$35.00 |
|
Cocking Handle
|
Modify receiver for inch pattern cocking handle |
$50.00 |
|
Mag Conversion
|
Modify magazine well to accept inch magazine
|
$50.00 |
|
Headspace
|
National match headspacing
(locking shoulder not included) |
$45.00 |
|
Heat Treat
|
Heat treat upper receiver to 40Rc |
$75.00 |
|
Custom Serial #
|
Add customer serial numbers to upper receiver
Match receiver to your kit's serial numbers! |
$35.00 |
|
Stock Assembly
|
Install skeletonized / sporter stock |
$55.00 |
|
Carry Handle
|
Machine receiver for carry handle slot |
$50.00 |
|
Safety Inspection
|
Inspect weapon for flaws and defects |
$35.00 |
|
Re-Tap
|
Retap receiver or barrel to inch or metric |
$42.50 |
|
Bolt Carrier
|
Lap bolt carrier to receiver
|
$35.00 |
|
Match Target
|
Match target crown 11º (for chrome lined add $20) |
$65.00 |
|
Range Test
|
Range test & sight in (ammo not included)
|
$35.00 |
|
Inspect Extractor
|
Inspect / repair extractor for proper ejection; smooth & polish extractor surface |
$85.00 |
|
Repair Gas Leak
|
Repair gas leak (front end) - seal gas tube to gas block
|
$72.00 |
|
Install Muzzle Break
|
Install muzzle break - on threaded barrel or non-threaded barrel |
$25.00 |
|
Weld Muzzle Break
|
Weld on muzzle break (does not include re-finishing)
|
$50.00 |
|
Accurize Rear Sight
|
Tighten & accurize rear sight - eliminate horizontal & vertical play between receiver surfaces |
$59.00 |
|
Adjust Trigger
|
Repair & adjust trigger pull - adjust trigger spring, plunger spring & trigger assembly
|
$85.00 |
|
Bolt & Carrier Interface
|
Bolt & carrier interface - smooth & polish surfaces; deburr & polish all internal surfaces |
$70.00 |
|
Accurize Receiver
|
Accurize upper & lower receiver - maintain ZERO play between upper & lower receiver fit
|
$40.00 |
|
Accurize Locking Shoulder
|
Accurize bolt & locking shoulder - assure full bolt & shoulder contact |
$65.00 |
|
Carbine Conversion
|
Carbine conversion -
1) Cut barrel to legal minimum 2) Recrown
for chrome lined barrels add $20
|
$100.00 |
|
Shipping
|
Insured Return Shipping
|
$35.00 |
