|
Installation instructions
1. Open bolt of M1 Garand rifle and make sure it is
unloaded
2. Remove gas cylinder lock screw. An M1 Garand
Combo tool or wide blade screwdriver is needed to do this.
3 Unscrew gas cylinder lock and inspect the threads on the
barrel. You may want to take a bristle brush an clean off carbon
from previous firing.
4 Put some light oil on barrel threads and gas cylinder
screw as well as on the threads of the compensator.
5. Screw on the compensator as if you were installing the
gas cylinder lock until you reach the point of resistance . The gas
cylinder: line up the gas cylinder lock with the gas cylinder and
reinstall gas cylinder screw. |
